~$ sudo rmmod -v quickcam
rmmod quickcam, wait=no
knipper..knipper...knipper....
terminal herstart
sudo modprobe -v quickcam
Password:
knipper...knipper...knipper....
wederom terminal herstart
dmesg|tail -40
[17305649.316000] quickcam [18.342095]: Not streaming/connected anymore. Ignoring isoc interrupt, dev=f79cdc00 streaming=0 status=-2
[17305649.316000] quickcam [18.343088]: Not streaming/connected anymore. Ignoring isoc interrupt, dev=f79cdc00 streaming=0 status=-2
[17305655.384000] quickcam [24.410862]: open users=1
[17305655.480000] quickcam [24.506123]: qc_sensor_init: call qc_sensor_setsize0 (324,248)
[17305655.484000] quickcam [24.509124]: set sensor=324x248 vwin=324x248
[17305655.516000] quickcam [24.542300]: failed qc_v4l_ioctl()=-515
[17305655.516000] quickcam [24.542695]: palette 2 is not supported
[17305655.516000] quickcam [24.542797]: failed qc_v4l_ioctl()=-22
[17305655.516000] quickcam [24.542907]: palette 9 is not supported
[17305655.516000] quickcam [24.543002]: failed qc_v4l_ioctl()=-22
[17305655.516000] quickcam [24.543100]: palette 10 is not supported
[17305655.516000] quickcam [24.543200]: failed qc_v4l_ioctl()=-22
[17305655.516000] quickcam [24.543317]: failed qc_v4l_ioctl()=-515
[17305655.516000] quickcam [24.543413]: failed qc_v4l_ioctl()=-515
[17305655.520000] quickcam [24.544193]: close users=0
[17305681.544000] quickcam [50.570616]: open users=1
[17305681.640000] quickcam [50.665265]: qc_sensor_init: call qc_sensor_setsize0 (324,248)
[17305681.640000] quickcam [50.668266]: set sensor=324x248 vwin=324x248
[17305681.676000] quickcam [50.701287]: failed qc_v4l_ioctl()=-515
[17305681.676000] quickcam [50.701560]: palette 2 is not supported
[17305681.676000] quickcam [50.701708]: failed qc_v4l_ioctl()=-22
[17305681.676000] quickcam [50.701885]: palette 9 is not supported
[17305681.676000] quickcam [50.701931]: failed qc_v4l_ioctl()=-22
[17305681.676000] quickcam [50.701952]: palette 10 is not supported
[17305681.676000] quickcam [50.701966]: failed qc_v4l_ioctl()=-22
[17305681.676000] quickcam [50.701983]: failed qc_v4l_ioctl()=-515
[17305681.676000] quickcam [50.701998]: failed qc_v4l_ioctl()=-515
[17305681.676000] quickcam [50.702498]: palette 10 is not supported
[17305681.676000] quickcam [50.702513]: failed qc_v4l_ioctl()=-22
[17305681.676000] quickcam [50.702533]: VIDIOCGWIN: 324,248
[17305681.676000] quickcam [50.702623]: VIDIOCSWIN: call qc_sensor_setsize 320,240
[17305681.676000] quickcam [50.704270]: set sensor=324x248 vwin=320x240
[17305682.140000] quickcam [51.165271]: USB transfer error -18
[17305682.140000] quickcam [51.165292]: qc_stream_error(qc=f1cea000)
[17305682.680000] quickcam [51.705282]: USB transfer error -18
[17305682.680000] quickcam [51.705303]: qc_stream_error(qc=f1cea000)
[17305883.312000] quickcam [12.352062]: close users=0
[17305883.316000] quickcam [12.354345]: Not streaming/connected anymore. Ignoring isoc interrupt, dev=f79cdc00 streaming=0 status=-2
[17305883.316000] quickcam [12.355345]: Not streaming/connected anymore. Ignoring isoc interrupt, dev=f79cdc00 streaming=0 status=-2
[17308021.400000] usbcore: deregistering driver quickcam