Lsusb:
Bus 008 Device 001: ID 0000:0000
Bus 005 Device 001: ID 0000:0000
Bus 005 Device 002: ID 2001:3c00 D-Link Corp. [hex] DWL-G122 802.11g rev. B1 [ralink]
Bus 007 Device 001: ID 0000:0000
Bus 006 Device 005: ID 04a9:1718 Canon, Inc.
Bus 006 Device 004: ID 058f:6362 Alcor Micro Corp.
Bus 006 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 003 Device 002: ID 0db0:6970 Micro Star International
Bus 003 Device 001: ID 0000:0000
Bus 001 Device 004: ID 045e:0039 Microsoft Corp. IntelliMouse Optical
Bus 001 Device 001: ID 0000:0000
dmesg
post a report
[ 36.665343] NET: Registered protocol family 8
[ 36.665346] NET: Registered protocol family 20
[ 36.665415] pnp: 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 36.665419] pnp: 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 36.669047] Time: tsc clocksource has been installed.
[ 36.695752] PCI: Bridge: 0000:00:01.0
[ 36.695755] IO window: disabled.
[ 36.695760] MEM window: fc900000-fe9fffff
[ 36.695764] PREFETCH window: cff00000-efefffff
[ 36.695769] PCI: Bridge: 0000:00:1e.0
[ 36.695773] IO window: 9000-9fff
[ 36.695778] MEM window: fea00000-feafffff
[ 36.695782] PREFETCH window: 70000000-700fffff
[ 36.695800] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 36.695812] NET: Registered protocol family 2
[ 36.733094] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 36.733228] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 36.734517] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 36.735002] TCP: Hash tables configured (established 131072 bind 65536)
[ 36.735006] TCP reno registered
[ 36.745235] checking if image is initramfs... it is
[ 37.196220] Switched to high resolution mode on CPU 0
[ 37.196315] Switched to high resolution mode on CPU 1
[ 37.324038] Freeing initrd memory: 7349k freed
[ 37.324684] audit: initializing netlink socket (disabled)
[ 37.324704] audit(1196502914.228:1): initialized
[ 37.324815] highmem bounce pool size: 64 pages
[ 37.327171] VFS: Disk quotas dquot_6.5.1
[ 37.327235] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 37.327346] io scheduler noop registered
[ 37.327349] io scheduler anticipatory registered
[ 37.327351] io scheduler deadline registered
[ 37.327367] io scheduler cfq registered (default)
[ 37.327458] Boot video device is 0000:01:00.0
[ 37.327662] isapnp: Scanning for PnP cards...
[ 37.679008] isapnp: No Plug & Play device found
[ 37.706092] Real Time Clock Driver v1.12ac
[ 37.706198] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 37.706292] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 37.707038] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 37.707910] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 37.708057] input: Macintosh mouse button emulation as /class/input/input0
[ 37.708147] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 37.708150] PNP: PS/2 controller doesn't have AUX irq; using default 12
[ 37.710176] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 37.710184] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 37.710346] mice: PS/2 mouse device common for all mice
[ 37.710485] EISA: Probing bus 0 at eisa.0
[ 37.710524] EISA: Detected 0 cards.
[ 37.710622] TCP cubic registered
[ 37.710635] NET: Registered protocol family 1
[ 37.710657] Using IPI No-Shortcut mode
[ 37.710824] Magic number: 3:953:928
[ 37.710926] hash matches device ptyxd
[ 37.711355] Freeing unused kernel memory: 364k freed
[ 37.743426] input: AT Translated Set 2 keyboard as /class/input/input1
[ 38.945026] AppArmor: AppArmor initialized<5>audit(1196502915.728:2): type=1505 info="AppArmor initialized" pid=1195
[ 38.954327] fuse init (API version 7.8)
[ 38.959891] Failure registering capabilities with primary security module.
[ 38.994872] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 38.994896] ACPI: Processor [CPU2] (supports 8 throttling states)
[ 39.628685] SCSI subsystem initialized
[ 39.632452] usbcore: registered new interface driver usbfs
[ 39.632488] usbcore: registered new interface driver hub
[ 39.632532] usbcore: registered new device driver usb
[ 39.637839] libata version 2.21 loaded.
[ 39.641065] ata_piix 0000:00:1f.1: version 2.11
[ 39.641088] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[ 39.641105] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 16
[ 39.641169] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 39.641293] scsi0 : ata_piix
[ 39.641382] scsi1 : ata_piix
[ 39.641571] ata1: PATA max UDMA/133 cmd 0x0001c000 ctl 0x0001bc02 bmdma 0x0001b000 irq 16
[ 39.641576] ata2: PATA max UDMA/133 cmd 0x0001b800 ctl 0x0001b402 bmdma 0x0001b008 irq 16
[ 39.643292] USB Universal Host Controller Interface driver v3.0
[ 39.757048] 8139too Fast Ethernet driver 0.9.28
[ 39.759610] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 39.768473] Floppy drive(s): fd0 is 1.44M
[ 39.816145] FDC 0 is a post-1991 82077
[ 39.869501] ata1.00: ATA-6: WDC WD1600JB-00GVA0, 08.02D08, max UDMA/100
[ 39.869506] ata1.00: 312581808 sectors, multi 16: LBA48
[ 39.869803] ata1.01: ATA-6: ST380011A, 3.06, max UDMA/100
[ 39.869806] ata1.01: 156301488 sectors, multi 16: LBA48
[ 39.885454] ata1.00: configured for UDMA/100
[ 39.900298] ata1.01: configured for UDMA/100
[ 40.383486] ata2.00: ATAPI: _NEC DVD_RW ND-3520A, 1.04, max UDMA/33
[ 40.383492] ata2.01: ATAPI: HL-DT-STDVD-ROM GDR8163B, 0L23, max UDMA/33
[ 40.555213] ata2.00: configured for UDMA/33
[ 40.726906] ata2.01: configured for UDMA/33
[ 40.727061] scsi 0:0:0:0: Direct-Access ATA WDC WD1600JB-00G 08.0 PQ: 0 ANSI: 5
[ 40.727224] scsi 0:0:1:0: Direct-Access ATA ST380011A 3.06 PQ: 0 ANSI: 5
[ 40.728382] scsi 1:0:0:0: CD-ROM _NEC DVD_RW ND-3520A 1.04 PQ: 0 ANSI: 5
[ 40.743675] scsi 1:0:1:0: CD-ROM HL-DT-ST DVD-ROM GDR8163B 0L23 PQ: 0 ANSI: 5
[ 40.745880] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 17
[ 40.745896] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 40.745902] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 40.746177] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 40.746215] uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000cc00
[ 40.746400] usb usb1: configuration #1 chosen from 1 choice
[ 40.746444] hub 1-0:1.0: USB hub found
[ 40.746459] hub 1-0:1.0: 2 ports detected
[ 40.766695] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 40.766726] sd 0:0:0:0: [sda] Write Protect is off
[ 40.766731] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 40.766770] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 40.766869] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 40.766888] sd 0:0:0:0: [sda] Write Protect is off
[ 40.766893] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 40.766929] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 40.766938] sda: sda1 sda2 sda3
[ 40.787859] sd 0:0:0:0: [sda] Attached SCSI disk
[ 40.787960] sd 0:0:1:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
[ 40.787977] sd 0:0:1:0: [sdb] Write Protect is off
[ 40.787981] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 40.788011] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 40.788075] sd 0:0:1:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
[ 40.788092] sd 0:0:1:0: [sdb] Write Protect is off
[ 40.788096] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 40.788127] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 40.788132] sdb: sdb1 sdb2 < sdb5 >
[ 40.826568] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 40.833861] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 40.833994] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 40.834041] sr 1:0:0:0: Attached scsi generic sg2 type 5
[ 40.834082] scsi 1:0:1:0: Attached scsi generic sg3 type 5
[ 40.846603] ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 19 (level, low) -> IRQ 18
[ 40.846620] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 40.846626] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 40.846663] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 40.846693] uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000d000
[ 40.846833] usb usb2: configuration #1 chosen from 1 choice
[ 40.846879] hub 2-0:1.0: USB hub found
[ 40.846890] hub 2-0:1.0: 2 ports detected
[ 40.854836] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 40.854845] Uniform CD-ROM driver Revision: 3.20
[ 40.854952] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 40.879834] sr1: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[ 40.879924] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 40.950456] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 16
[ 40.950474] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 40.950480] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 40.950523] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 40.950554] uhci_hcd 0000:00:1d.2: irq 16, io base 0x0000d400
[ 40.950717] usb usb3: configuration #1 chosen from 1 choice
[ 40.950766] hub 3-0:1.0: USB hub found
[ 40.950776] hub 3-0:1.0: 2 ports detected
[ 41.054265] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 17
[ 41.054283] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 41.054289] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 41.054330] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 41.054361] uhci_hcd 0000:00:1d.3: irq 17, io base 0x0000d800
[ 41.054509] usb usb4: configuration #1 chosen from 1 choice
[ 41.054551] hub 4-0:1.0: USB hub found
[ 41.054562] hub 4-0:1.0: 2 ports detected
[ 41.086057] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 41.158212] ACPI: PCI Interrupt 0000:02:0b.0[A] -> GSI 23 (level, low) -> IRQ 19
[ 41.158320] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19
[ 41.158334] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 41.158340] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 41.158375] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 41.158421] ehci_hcd 0000:00:1d.7: debug port 1
[ 41.158429] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[ 41.158441] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfebffc00
[ 41.158592] eth0: RealTek RTL8139 at 0xf8814e00, 00:11:09:93:d5:b3, IRQ 19
[ 41.158596] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 41.162381] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 41.217867] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 41.218067] usb usb5: configuration #1 chosen from 1 choice
[ 41.218113] hub 5-0:1.0: USB hub found
[ 41.218125] hub 5-0:1.0: 8 ports detected
[ 41.235388] Attempting manual resume
[ 41.235393] swsusp: Resume From Partition 8:21
[ 41.235395] PM: Checking swsusp image.
[ 41.268420] PM: Resume from disk failed.
[ 41.313363] kjournald starting. Commit interval 5 seconds
[ 41.313379] EXT3-fs: mounted filesystem with ordered data mode.
[ 41.321914] ACPI: PCI Interrupt 0000:02:03.2[C] -> GSI 17 (level, low) -> IRQ 20
[ 41.321936] ehci_hcd 0000:02:03.2: EHCI Host Controller
[ 41.321984] ehci_hcd 0000:02:03.2: new USB bus registered, assigned bus number 6
[ 41.345643] ehci_hcd 0000:02:03.2: irq 20, io mem 0xfeafff00
[ 41.345656] ehci_hcd 0000:02:03.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
[ 41.345801] usb usb6: configuration #1 chosen from 1 choice
[ 41.345834] hub 6-0:1.0: USB hub found
[ 41.345846] hub 6-0:1.0: 5 ports detected
[ 41.449631] ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 19 (level, low) -> IRQ 18
[ 41.449657] ohci_hcd 0000:02:03.0: OHCI Host Controller
[ 41.449708] ohci_hcd 0000:02:03.0: new USB bus registered, assigned bus number 7
[ 41.449731] ohci_hcd 0000:02:03.0: irq 18, io mem 0xfeafd000
[ 41.625182] usb 1-1: device not accepting address 2, error -71
[ 42.010744] usb usb7: configuration #1 chosen from 1 choice
[ 42.010788] hub 7-0:1.0: USB hub found
[ 42.010803] hub 7-0:1.0: 3 ports detected
[ 42.176319] usb 5-1: new high speed USB device using ehci_hcd and address 2
[ 42.467506] usb 5-1: configuration #1 chosen from 1 choice
[ 42.523874] ACPI: PCI Interrupt 0000:02:03.1 -> GSI 16 (level, low) -> IRQ 17
[ 42.523892] ohci_hcd 0000:02:03.1: OHCI Host Controller
[ 42.523923] ohci_hcd 0000:02:03.1: new USB bus registered, assigned bus number 8
[ 42.523938] ohci_hcd 0000:02:03.1: irq 17, io mem 0xfeafe000
[ 43.084996] usb usb8: configuration #1 chosen from 1 choice
[ 43.085028] hub 8-0:1.0: USB hub found
[ 43.085039] hub 8-0:1.0: 2 ports detected
[ 43.126806] usb 6-3: new high speed USB device using ehci_hcd and address 2
[ 43.261771] usb 6-3: configuration #1 chosen from 1 choice
[ 43.498214] usb 1-2: new low speed USB device using uhci_hcd and address 4
[ 43.680030] usb 1-2: configuration #1 chosen from 1 choice
[ 43.921547] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 44.164867] usb 3-1: configuration #1 chosen from 1 choice
[ 49.223364] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 49.226916] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 49.338241] intel_rng: FWH not detected
[ 49.455679] Linux agpgart interface v0.102 (c) Dave Jones
[ 49.597079] agpgart: Detected an Intel 865 Chipset.
[ 49.603787] agpgart: AGP aperture is 128M @ 0xf0000000
[ 49.691358] iTCO_vendor_support: vendor-support=0
[ 49.708662] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 49.708774] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0860)
[ 49.708832] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 50.453392] nvidia: module license 'NVIDIA' taints kernel.
[ 50.706469] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 17
[ 50.706729] NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.23 Thu Oct 4 10:16:34 PDT 2007
[ 50.757995] Bluetooth: Core ver 2.11
[ 50.758067] NET: Registered protocol family 31
[ 50.758070] Bluetooth: HCI device and connection manager initialized
[ 50.758075] Bluetooth: HCI socket layer initialized
[ 50.774990] input: PC Speaker as /class/input/input2
[ 50.805398] Bluetooth: HCI USB driver ver 2.9
[ 50.807423] usbcore: registered new interface driver hci_usb
[ 50.902775] usbcore: registered new interface driver hiddev
[ 50.914884] parport_pc 00:0a: reported by Plug and Play ACPI
[ 50.914909] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 50.917255] input: Microsoft Microsoft IntelliMouse� Optical as /class/input/input3
[ 50.917351] input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse� Optical] on usb-0000:00:1d.0-2
[ 50.917373] usbcore: registered new interface driver usbhid
[ 50.917379] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 51.037332] idVendor = 0x2001, idProduct = 0x3c00
[ 51.037600] usbcore: registered new interface driver rt2570
[ 51.188383] usbcore: registered new interface driver libusual
[ 51.297135] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 51.297141] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 51.307381] Initializing USB Mass Storage driver...
[ 51.307466] scsi2 : SCSI emulation for USB Mass Storage devices
[ 51.307541] usbcore: registered new interface driver usb-storage
[ 51.307545] USB Mass Storage support registered.
[ 51.307676] usb-storage: device found at 2
[ 51.307679] usb-storage: waiting for device to settle before scanning
[ 51.326854] usbcore: registered new interface driver rt2500usb
[ 51.359593] RT25usb Driver version 1.0.0
[ 52.405995] ***rt2x00***: Interface goes up for the first time, activating permanent MAC
[ 52.406003] ***rt2x00***: Active MAC is: 00:13:46:ea:06:b2.
[ 52.444659] ACPI: PCI Interrupt 0000:00:1f.5 -> GSI 17 (level, low) -> IRQ 20
[ 52.444688] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 52.767533] intel8x0_measure_ac97_clock: measured 54716 usecs
[ 52.767537] intel8x0: clocking to 48000
[ 53.352272] lp0: using parport0 (interrupt-driven).
[ 53.420801] ndiswrapper version 1.45 loaded (smp=yes)
[ 53.446029] usbcore: registered new interface driver ndiswrapper
[ 53.501736] Adding 3229024k swap on /dev/sdb5. Priority:-1 extents:1 across:3229024k
[ 53.842956] EXT3 FS on sdb1, internal journal
[ 53.897149] NET: Registered protocol family 17
[ 56.298600] usb-storage: device scan complete
[ 56.299216] scsi 2:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 56.299712] scsi 2:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 56.300211] scsi 2:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 56.300709] scsi 2:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 56.302627] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[ 56.302705] sd 2:0:0:0: Attached scsi generic sg4 type 0
[ 56.304491] sd 2:0:0:1: [sdd] Attached SCSI removable disk
[ 56.304550] sd 2:0:0:1: Attached scsi generic sg5 type 0
[ 56.306391] sd 2:0:0:2: [sde] Attached SCSI removable disk
[ 56.306461] sd 2:0:0:2: Attached scsi generic sg6 type 0
[ 56.308913] sd 2:0:0:3: [sdf] Attached SCSI removable disk
[ 56.308989] sd 2:0:0:3: Attached scsi generic sg7 type 0
[ 57.009396] input: Power Button (FF) as /class/input/input4
[ 57.009426] ACPI: Power Button (FF) [PWRF]
[ 57.009498] input: Power Button (CM) as /class/input/input5
[ 57.009521] ACPI: Power Button (CM) [PWRB]
[ 57.043918] No dock devices found.
[ 58.602774] ppdev: user-space parallel port driver
[ 58.881005] eth0: link down
[ 58.970346] audit(1196499336.399:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5064 profile="/usr/sbin/cupsd"
[ 59.078415] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 59.078423] apm: disabled - APM is not SMP safe.
[ 59.372814] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 59.439761] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 59.456692] NFSD: starting 90-second grace period
[ 60.581416] Failure registering capabilities with primary security module.
[ 60.765516] Bluetooth: L2CAP ver 2.8
[ 60.765523] Bluetooth: L2CAP socket layer initialized
[ 60.901954] Bluetooth: RFCOMM socket layer initialized
[ 60.902120] Bluetooth: RFCOMM TTY layer initialized
[ 60.902124] Bluetooth: RFCOMM ver 1.8
[ 63.437733] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[ 63.437754] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 63.437793] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[ 64.363687] NET: Registered protocol family 10
[ 64.364321] lo: Disabled Privacy Extensions
[ 64.364804] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 67.356880] usb 6-3: reset high speed USB device using ehci_hcd and address 2
[ 74.570663] rausb0: no IPv6 routers present
[ 95.289372] usb 6-3: reset high speed USB device using ehci_hcd and address 2
[ 113.263935] usb 6-3: reset high speed USB device using ehci_hcd and address 2
[ 121.288590] usb 6-3: reset high speed USB device using ehci_hcd and address 2
[ 173.219103] usb 6-3: reset high speed USB device using ehci_hcd and address 2
[ 177.556790] ppdev0: registered pardevice
[ 177.556809] ppdev0: unregistered pardevice
[ 178.947701] ppdev0: registered pardevice
[ 178.994995] ppdev0: unregistered pardevice
[ 182.154456] usb 6-2: new high speed USB device using ehci_hcd and address 3
[ 182.292625] usb 6-2: configuration #1 chosen from 1 choice
[ 182.405455] scsi3 : SCSI emulation for USB Mass Storage devices
[ 182.405663] usb-storage: device found at 3
[ 182.405668] usb-storage: waiting for device to settle before scanning
[ 182.536968] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1718
[ 182.537417] usbcore: registered new interface driver usblp
[ 182.537587] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 187.395976] usb-storage: device scan complete
[ 187.397096] scsi 3:0:0:0: Direct-Access Canon MP600Storage 0106 PQ: 0 ANSI: 2
[ 187.401252] sd 3:0:0:0: [sdg] Attached SCSI removable disk
[ 187.401332] sd 3:0:0:0: Attached scsi generic sg8 type 0
[ 198.773423] usb 6-2: usbfs: interface 1 claimed by usblp while 'xsane' sets config #1
[ 198.786166] ppdev0: registered pardevice
[ 198.786323] ppdev0: unregistered pardevice
[ 199.128541] ppdev0: registered pardevice
[ 199.174423] ppdev0: unregistered pardevice
[ 199.179874] usb 6-2: usbfs: interface 1 claimed by usblp while 'xsane' sets config #1
[ 199.192507] usb 6-2: usbfs: interface 1 claimed by usblp while 'xsane' sets config #1
[ 201.123648] usb 6-3: reset high speed USB device using ehci_hcd and address 2
[ 223.164434] usb 6-3: reset high speed USB device using ehci_hcd and address 2
[ 305.016629] usb 6-3: reset high speed USB device using ehci_hcd and address 2
[ 506.719253] usb 6-3: reset high speed USB device using ehci_hcd and address 2
[ 554.652228] usb 6-3: reset high speed USB device using ehci_hcd and address 2
[ 580.598732] usb 6-3: reset high speed USB device using ehci_hcd and address 2
[ 592.581758] usb 6-3: reset high speed USB device using ehci_hcd and address 2
[ 608.583122] usb 6-3: reset high speed USB device using ehci_hcd and address 2
[ 626.561742] usb 6-3: reset high speed USB device using ehci_hcd and address 2
[ 632.545231] usb 6-3: reset high speed USB device using ehci_hcd and address 2
[ 640.565907] usb 6-3: reset high speed USB device using ehci_hcd and address 2
[ 640.698683] usb 6-3: can't restore configuration #1 (error=-71)
[ 640.698731] usb 6-3: USB disconnect, address 2
[ 640.700633] sd 2:0:0:2: [sde] READ CAPACITY failed
[ 640.700647] sd 2:0:0:2: [sde] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[ 640.700663] sd 2:0:0:2: [sde] Sense not available.
[ 640.706975] scsi 2:0:0:3: [sdf] READ CAPACITY failed
[ 640.706992] scsi 2:0:0:3: [sdf] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
[ 640.707005] scsi 2:0:0:3: [sdf] Sense not available.
[ 640.707049] scsi 2:0:0:3: rejecting I/O to dead device
[ 640.707069] scsi 2:0:0:3: [sdf] Write Protect is off
[ 640.707077] scsi 2:0:0:3: [sdf] Mode Sense: 00 00 00 00
[ 640.707086] scsi 2:0:0:3: [sdf] Assuming drive cache: write through
[ 640.707105] scsi 2:0:0:3: rejecting I/O to dead device
[ 640.707146] scsi 2:0:0:3: rejecting I/O to dead device
[ 640.707158] scsi 2:0:0:3: rejecting I/O to dead device
[ 640.707169] scsi 2:0:0:3: rejecting I/O to dead device
[ 640.707185] scsi 2:0:0:3: rejecting I/O to dead device
[ 640.707194] scsi 2:0:0:3: [sdf] READ CAPACITY failed
[ 640.707198] scsi 2:0:0:3: [sdf] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
[ 640.707208] scsi 2:0:0:3: [sdf] Sense not available.
[ 640.707220] scsi 2:0:0:3: rejecting I/O to dead device
[ 640.707231] scsi 2:0:0:3: [sdf] Write Protect is off
[ 640.707235] scsi 2:0:0:3: [sdf] Mode Sense: 00 00 00 00
[ 640.707241] scsi 2:0:0:3: [sdf] Assuming drive cache: write through
[ 640.707297] scsi 2:0:0:3: rejecting I/O to dead device
[ 640.707726] scsi 2:0:0:2: [sde] Write Protect is off
[ 640.707733] scsi 2:0:0:2: [sde] Mode Sense: 00 00 00 00
[ 640.707740] scsi 2:0:0:2: [sde] Assuming drive cache: write through
[ 640.707756] scsi 2:0:0:2: rejecting I/O to dead device
[ 640.707782] scsi 2:0:0:2: rejecting I/O to dead device
[ 640.707799] scsi 2:0:0:2: rejecting I/O to dead device
[ 640.707815] scsi 2:0:0:2: rejecting I/O to dead device
[ 640.707830] scsi 2:0:0:2: rejecting I/O to dead device
[ 640.707840] scsi 2:0:0:2: [sde] READ CAPACITY failed
[ 640.707848] scsi 2:0:0:2: [sde] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
[ 640.707858] scsi 2:0:0:2: [sde] Sense not available.
[ 640.707869] scsi 2:0:0:2: rejecting I/O to dead device
[ 640.707882] scsi 2:0:0:2: [sde] Write Protect is off
[ 640.707889] scsi 2:0:0:2: [sde] Mode Sense: 00 00 00 00
[ 640.707897] scsi 2:0:0:2: [sde] Assuming drive cache: write through
[ 640.707941] scsi 2:0:0:2: rejecting I/O to dead device
[ 640.813548] usb 6-3: new high speed USB device using ehci_hcd and address 4
[ 640.948296] usb 6-3: configuration #1 chosen from 1 choice
[ 640.948659] scsi4 : SCSI emulation for USB Mass Storage devices
[ 640.948858] usb-storage: device found at 4
[ 640.948863] usb-storage: waiting for device to settle before scanning
[ 645.938440] usb-storage: device scan complete
[ 645.940121] scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 645.942324] scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 645.943578] scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 645.944338] scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 645.947811] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[ 645.947895] sd 4:0:0:0: Attached scsi generic sg4 type 0
[ 645.949629] sd 4:0:0:1: [sdd] Attached SCSI removable disk
[ 645.949703] sd 4:0:0:1: Attached scsi generic sg5 type 0
[ 645.951461] sd 4:0:0:2: [sde] Attached SCSI removable disk
[ 645.951534] sd 4:0:0:2: Attached scsi generic sg6 type 0
[ 645.953279] sd 4:0:0:3: [sdf] Attached SCSI removable disk
[ 645.953358] sd 4:0:0:3: Attached scsi generic sg7 type 0
[ 893.379215] usb 6-2: USB disconnect, address 3
[ 893.380365] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: usblp0: removed
[ 903.949243] usb 6-2: new high speed USB device using ehci_hcd and address 5
[ 904.084878] usb 6-2: configuration #1 chosen from 1 choice
[ 904.128228] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1718
[ 904.128391] scsi5 : SCSI emulation for USB Mass Storage devices
[ 904.128588] usb-storage: device found at 5
[ 904.128592] usb-storage: waiting for device to settle before scanning
[ 909.119182] usb-storage: device scan complete
[ 909.120519] scsi 5:0:0:0: Direct-Access Canon MP600Storage 0106 PQ: 0 ANSI: 2
[ 909.124918] sd 5:0:0:0: [sdg] Attached SCSI removable disk
[ 909.125004] sd 5:0:0:0: Attached scsi generic sg8 type 0
[ 1134.480043] usb 6-2: usbfs: interface 1 claimed by usblp while 'xsane' sets config #1
[ 1134.499915] ppdev0: registered pardevice
[ 1134.499934] ppdev0: unregistered pardevice
[ 1134.946631] ppdev0: registered pardevice
[ 1134.999151] ppdev0: unregistered pardevice
[ 1135.013404] usb 6-2: usbfs: interface 1 claimed by usblp while 'xsane' sets config #1
[ 1135.034823] usb 6-2: usbfs: interface 1 claimed by usblp while 'xsane' sets config #1
[ 1208.450381] usb 6-3: reset high speed USB device using ehci_hcd and address 4
[ 1561.828702] usb 6-2: usbfs: interface 1 claimed by usblp while 'xscanimage' sets config #1
[ 1561.843931] ppdev0: registered pardevice
[ 1561.844301] ppdev0: unregistered pardevice
[ 1562.289812] ppdev0: registered pardevice
[ 1562.337801] ppdev0: unregistered pardevice
da's nog al een lange...