hallo
Mijn scanner werd niet automatisch herkend dus zocht ik naar een passende driver. Eerst sane geïnstalleerd, daarna in de synaptic gaan zoeken naar een passende driver. Hij vond libsane-extra die ondersteuning biedt voor:
""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
This package includes some backends that are not yet included into the
official SANE distribution. Currently, they are :
* epkowa (some EPSON scanners)
* geniusvp2 (Genius ColorPage-Vivid Pro II)
-->* hp_rts88xx (HP ScanJet 4400C, HP ScanJet 4470C)
* hp3900 (HP ScanJet 3970C, HP ScanJet 4070, HP ScanJet 4370)
* ls5000 (Nikon LS-5000 ED, Coolscan 5000 ED)
""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
OK, ik was zo blij dit te zien...
Maar het was te mooi om waar te zijn, ik opende Xsane en krijg een fout-melding:
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
Kon apparaat niet vinden hp_rts88xx:libusb:004:002:
Fout tijdens apparaat communicatie.
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
-------------------------------------------------------------------------------------------------------------
Dit probeer ik nu, maar zit vast waar ik het hieronder aangeef...
Include the HP_RTS88xx backend-souces into the SANE sources. ?%µ^??
-------------------------------------------------------------------------------------------------------------
Driver install
*
You need the SANE sources (ver. 1.0.xx) from
http://www.sane-project.org/ *
Kernel 2.4: To use the Scanner module check if it is loaded! Load them with „modprobe scanner vendor=0x3f0 product=0x805 “ (hp4470c, 0x805 = hp4400c).
* Kernel 2.6: Install the libusb (>0.1.7) if it isn't installed.
*
You need the frondends „Xsane“ , „XscanImage“ or „Kooka“ installed on your PC.
*
Include the HP_RTS88xx backend-souces into the SANE sources.
*
>>> HIER ZIT VAST
Go into sane_hp_rts88xx/sane_hp_rts88xx and start patch-sane.sh for patch the SANE sources.
*
Start „./configure“ , „make“ and „make install“ on the root folder from the SANE sources. Please read „README“ and „README.linux“ for more.
*
Check the installation with „scanimage -L“. It will show the installed driver. If no, please read „README“ and „README.linux“ for more.
*
Modify /etc/sane.d/hp_rts88xx.conf : If you see a black image, change the CCD (HP44x0C).
*
Additional for SuSe Linux users : use the HP4100 driver for installation under YaST. Modify /etc/sane.d/dll.conf : include hp_rts88xx and disable all another drivers.
*
You can find more information's about SANE installation by the sane-troubleshoot Homepage
*
Here my additional README.
graag advies
ta