Ik zou de Roland SC-8820 en de Tascam er uit halen en dan alleen de Tascam aansluiten en vervolgens nog een keer proberen.
HOi,
Heb sc8820 verwijderd, maar maakt niet uit.
heb nu de volgende meldingen in JACK:
21:50:54.960 Patchbay deactivated.
21:50:55.162 Statistics reset.
21:50:55.244 Startup script...
21:50:55.245 artsshell -q terminate
21:50:55.252 ALSA connection graph change.
sh: artsshell: not found
21:50:56.161 Startup script terminated with exit status=32512.
21:50:56.163 JACK is starting...
21:50:56.164 /usr/bin/jackd -dalsa -dhw:0 -r44100 -p1024 -n3 -i2 -o2
21:50:56.290 JACK was started with PID=4457.
21:50:56.377 ALSA connection change.
no message buffer overruns
jackd 0.116.1
Copyright 2001-2005 Paul Davis and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
JACK compiled with System V SHM support.
loading driver ..
apparent rate = 44100
creating alsa driver ... hw:0|hw:0|1024|3|44100|2|2|nomon|swmeter|-|32bit
control device hw:0
configuring for 44100Hz, period = 1024 frames (23.2 ms), buffer = 3 periods
ALSA: final selected sample format for capture: 32bit integer little-endian
ALSA: use 3 periods for capture
ALSA: final selected sample format for playback: 32bit integer little-endian
ALSA: use 3 periods for playback
21:50:58.386 Server configuration saved to "/home/leseric/.jackdrc".
21:50:58.387 Statistics reset.
21:50:58.388 Client activated.
21:50:58.390 JACK connection change.
21:50:58.393 JACK connection graph change.
21:50:59.609 Client deactivated.
21:50:59.610 JACK is stopping...
jack main caught signal 15
21:50:59.643 JACK was stopped successfully.
21:50:59.643 Post-shutdown script...
21:50:59.644 killall jackd
jackd: er is geen proces afgebroken
21:51:00.077 Post-shutdown script terminated with exit status=256.
21:51:12.104 Startup script...
21:51:12.105 artsshell -q terminate
sh: artsshell: not found
21:51:12.508 Startup script terminated with exit status=32512.
21:51:12.508 JACK is starting...
21:51:12.509 /usr/bin/jackd -dalsa -dhw:1 -r44100 -p1024 -n3 -i2 -o2
21:51:12.511 JACK was started with PID=4471.
no message buffer overruns
jackd 0.116.1
Copyright 2001-2005 Paul Davis and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
JACK compiled with System V SHM support.
loading driver ..
apparent rate = 44100
creating alsa driver ... hw:1|hw:1|1024|3|44100|2|2|nomon|swmeter|-|32bit
control device hw:1
ALSA: Cannot open PCM device alsa_pcm for playback. Falling back to capture-only mode
cannot load driver module alsa
21:51:12.542 JACK was stopped successfully.
21:51:12.542 Post-shutdown script...
21:51:12.543 killall jackd
jackd: er is geen proces afgebroken
21:51:12.954 Post-shutdown script terminated with exit status=256.
21:51:14.586 Could not connect to JACK server as client. - Overall operation failed. - Unable to connect to server. Please check the messages window for more info.
Kan iemand hier iets mee?
Of doe ik iets verkeerd in de instellingen van JACK.
Dit zijn de instellingen in de bijlage.
Gteertz.