K3B probleem

[Drummies]

bij branden cd en of formateren cd-rw  error melding cannot raise rlimit_memlock limits iemand bekend met dit fenomeen en evt de oplossing

mvg drummies
-----------------------
K3b Version: 1.0.4

KDE Version: 3.5.9
QT Version:  3.3.8b
Kernel:      2.6.24-17-generic
Devices
-----------------------
PHILIPS CDRW48P P1.6 (/dev/scd1, ) [CD-R, CD-RW, CD-ROM] [CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, RAW/R96R]

LG CD-ROM CRD-8521B 1.03 (/dev/scd0, ) [CD-ROM] [Fout] [Geen]
Used versions
-----------------------
cdrecord: 1.1.6

cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/scd1 speed=2 -tao driveropts=burnfree -eject blank=fast -force

cdrecord
-----------------------
/usr/bin/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.

scsidev: '/dev/scd1'
devname: '/dev/scd1'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.6
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 1 = CD-ROM
Driveropts: 'burnfree'
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   :
Vendor_info    : 'PHILIPS '
Identification : 'CDRW48P         '
Revision       : 'P1.6'
Device seems to be: Generic mmc CD-RW.
Current: 0x000A (CD-RW)
Profile: 0x0008 (CD-ROM)
Profile: 0x0009 (CD-R)
Profile: 0x000A (CD-RW) (current)
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO RAW/R96R
Drive buf size : 3317760 = 3240 KB
Drive DMA Speed: 16415 kB/s 93x CD 11x DVD
Speed set to 8472 KB/s
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 4
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type A, high Beta category (A+) (3)
  ATIP start of lead in:  -11849 (97:24/01)
  ATIP start of lead out: 359847 (79:59/72)
Disk type:    Long strategy type (Cyanine, AZO or similar)
Manuf. index: 25
Manufacturer: Taiyo Yuden Company Limited
Waiting for drive to calm down.
Starting to write CD/DVD at speed  48.0 in real force BLANK mode for single session.
Last chance to quit, starting real write in  2 seconds.
   1 seconds.
   0 seconds. Operation starts.
Errno: 5 (Input/output error), blank unit scsi sendcmd: no error
CDB:  A1 01 00 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 73 03 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x73 Qual 0x03 (power calibration area error) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 1.220s timeout 9600s
Starting to write CD/DVD at speed  48.0 in real force BLANK mode for single session.
No chance to quit anymore. Operation starts.
Performing OPC...
Blanking PMA, TOC, pregap
Errno: 5 (Input/output error), blank unit scsi sendcmd: no error
CDB:  A1 01 00 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 73 03 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x73 Qual 0x03 (power calibration area error) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.038s timeout 9600s
/usr/bin/wodim: Cannot blank disk, aborting.
/usr/bin/wodim: Some drives do not support all blank types.
/usr/bin/wodim: Try again with wodim blank=all.

[Gijsbert]

Staan de rechten goed in K3b?  instellingen>Setup System Permissions.

Met vriendelijke groet,

Gijs

[Drummies]

goedemorgen gijsbert als ik bij k3b instellingen kijk kan ik k3b instellen ,maar de optie setup sijstem permissions zie ik nergens ,wel diverse instellingen zoals apparaten,programma,s cddb plugins etc ,waaarschijnlijk bedoel jij iets anders

mvg drummies

[kihid]

Staan de rechten goed in K3b?  instellingen>Setup System Permissions.

Met vriendelijke groet,

Gijs

Nou bij mij staat dat er niet, dan was mijn rechten probleem wat ik af en toe om onverklaarbare reden heb misschien op te lossen.

[Gijsbert]

Mijn exuces heren, ik doel ergens anders op, soms ben ik een beetje kort door de bocht.
Het betreft wel een rechten verhaal:

Code: [Selecteer]

Users must be members of the "cdrom" group
------------------------------------------

To be able to access the CD/DVD burner, users must be members of the "cdrom"
group.  To check whether you are a member of that group, run the following
command:

  groups

If you don't see the "cdrom" group, ask the administrator to be added to that
group or run the following command as root:

  adduser [username] cdrom

If you are already a member of the "cdrom" group and are experiencing problems,
then you may need to give SUID privileges to wodim.  To do this, run the
following command as root:

  dpkg-statoverride --add root cdrom 04710 /usr/bin/wodim
 
 -- Francois Marier , Fri, 3 Dec 2006 16:38:14 -0500


Ripping DVD using transcode
---------------------------

K3b can use transcode in order to rip dvd if you properly setup the "Options"
tab that allows you to configure the location of additional tools. Some of
these tools (tccat, tcdecode, tcextract) are provided by the transcode program.
However, transcode is not currently available in Debian due to legal issues and
probably never will be. If you want to use transcode you can find it on
http://debian.video.free.fr, to have apt use it as an additional source add the
line corresponding to your debian version in your your /etc/apt/sources.list

For stable:
  deb http://www.debian-multimedia.org stable main

For testing:
  deb http://www.debian-multimedia.org testing main

For unstable:
  deb http://www.debian-multimedia.org sid main

Notice, however, that the above packages are neither official nor
supported by Debian. Moreover, the binary packages are only available
for a limited set of architectures and not for all the architectures
supported by Debian.

 -- Jean-Michel Kelbert , Thu, 20 Feb 2003 17:23:39 -0500Uit de documentatie /usr/share/doc/K3b. Ik hoop dat jullie er iets aanhebben.

Met vriendelijke groet,

Gijs

[kihid]

Gijsbert,

hey ik was wel toegevoegd aan de groep cdrom, maar heb wel even als root dit gedaan: dpkg-statoverride --add root cdrom 04710 /usr/bin/wodim


Eens kijken of dit wat uitmaakt, hoop van wel, thanks.